General data sheet

  • Adheres & repairs also under water.
  • Hardens within 15 minutes.
  • Simple to apply.

General description:

  • Repairs practically everything. All metals, ceramics, wood, glass, cement, plastics etc. (not applicable to soft or flexible surfaces like rubber etc.).
  • Adheres strongly also to wet surfaces, even under water.
  • Hardens in 15 minutes.
  • Is easy to apply and does not stick to your fingers.
  • Can be drilled, sawn, polished and painted.

Applications:

  • Repairs of leakage in water pipes, tanks, central heating.
  • Various repairs under water: boats, swimming pools, aquariums, etc.
  • Repairs of fuel and oil tanks.
  • Connecting different pipes with different diameters.
  • Repairs in boats, cars and caravans.
  • Sealing pipes.
  • Renewing screw-threads.
  • Replace cable-shoes & isolation tape.

Technical data

Working time after kneading: 3 minutes at 20ºc
Hardening time, standard: 15 minutes at 20ºc
Under water: 20 minutes at 20ºc

Application

  1. Make surface rough with sandpaper or steel brush.
  2. Tear off required quantity and knead it until you get one colour (± 1 minute).
  3. Apply on the required spot.

Physical specification:

Specific gravity: 1.9 gr/cm3
Hardness: 85 shore
Compression strength: 900 kg/cm2
Tensile strength: 62 kg/cm2
Max.usable temp.: 121ºc
For short periods: 149ºc
Electrical resistance: 3000 megohm
Shrinkage: <1%
Non-volatile content: 100%
Chemical resistance: Resistant to hydrocarbons, ketons, alcohols, esters, halocarbons, aqueos, diluted acids and diluted bases.