How to apply Aquakit

AQUAKIT is easy to apply. It is important to make the area raw and fat free using sandpaper or a steel brush.

  1. Cut with a knife or simply tear off the required amount.
  2. Mix for about 1 minute until the 2 colours become one colour (grey).
  3. Apply on the required spot.

Remarks:

  1. For repair under pressure you first reduce pressure by inserting a piece of wood or another type of plug in the hole. Then apply AQUAKIT and keep pressing on it for several minutes.
  2. In order to make the repaired area smooth you can gently form the required shape with a wet finger or wet cloth immediately after applying before, it hardens.

 

Watch Film: