Material safety data sheet
According to 91/155 EC
As amended by 2001/58
Print date DD.MM.YYYY
1. Identification of the substance/Preparation and the company/Undertaking
| Commercial Product Name |
AQUAKIT |
| Company |
Technos DIY, Biesboschstraat 68 , 1078 MZ Amsterdam |
| Tel |
+31- 20-6654446 |
| Telefax |
+31-20-6682856 |
| Emergency telephone number |
+31-20-6654446 |
2. Composition/Information on ingredients
| Chemical nature of the preparation |
| Solvent free adhesive based on epoxy-resins |
Hazardous components
| CAS-No. |
Hazardous components |
%range |
Risk |
symbol |
R-PHRASE |
EC number |
| 25068-38-6 |
Epoxy resin, mw. <= 700 |
10-30 |
Irritant |
Xi |
36/38-43-51/53 |
500-033-5 |
| 90-72-2 |
Tri(Dimethyllaminomethyl) phenol |
0,5-1,5 |
Harmful |
Xn |
R22-36/38 |
202-013-9 |
| 1314-98-3 |
Zinc Sulphide |
0,5-1,5 |
— |
— |
— |
215-251-3 |
For text of the R- phrases see point 16
3. Health risk/Identification of possible hazards
| General |
|
| Inhalation: |
Dust caused by sandpapering the product can cause lung damage. |
| Skin contact: |
Irritant, can with contact cause sensitivity. |
| Eye contact: |
Can cause irritation. |
| Ingestion: |
Irritation of the intestinal tract. |
4. First help
| Inhalation: |
Remove to fresh air. Keep warm and keep rested. If required consult physician. |
| Ingestion: |
Do not induce vomiting. Consult a physician. |
| Skin contact: |
Wash with soap and plenty of water. |
| Eye contact: |
Remove contact lenses. Flush with plenty of water for at least 15 minutes. |
5. Fire fighting measures
| Extinguishing media: |
| Water spray; foam; CO2 ; dry chemical. |
| Unusual hazards: |
| CO; aldehydes; acids; oxides of sulphur & nitrogen may be formed. |
| Protective equipment: |
| Inhalation protection is advised. |
6. Accidental release measures
| Personal precautions: |
| Ensure for sufficient ventilation |
| Environmental precautions: |
| Removal in accordance to local rules |
| Methods for cleaning up: |
Take up mechanically
and collect in suitable container for disposal |
7. Handling and storage
| Handling |
Ensure adequate ventilation. Use gloves and safety glases.
Scoured off material of the product can produce dust which can cause lung damage.When scouring the material inhallation protection is required. |
| Storage |
Store in a well sealed container in a cooled and ventilated place. |
8. Exposure controls/Personal protection
| Borders for exposure |
|
| Work related exposure: |
MAC-value TGG 8 hours in mg/m³:10 (inhalable material). |
| Respiratory organs: |
No eating or smoking during handling. |
| Hands: |
Rubber or PVC gloves. |
| Eyes: |
Safety glasses. |
| Skin: |
— |
| Environmental exposure: |
Avoid discharge via waste pipe. |
9. Physical and chemical properties
| Appearance: |
White and grey putty |
| Odour: |
sulphur, mercaptan |
| pH Value: |
Not applicable |
| Concentration: |
Not applicable |
| Boiling point: |
Not applicable |
| Melting point: |
Not applicable |
| Flaming point: |
Not applicable |
| Flammability: |
Not applicable |
| Property |
Value |
Test method |
| Hardness after 1 hour |
70 shore D |
ASTM D-2240 |
| Hardness after 24 hours |
75 shore D |
ASTM D-2240 |
| Shear tensile strength after 1 hour |
45 kg/cm² |
ASTM D-1002 |
| Shear tensile strength after 24 hours |
70 kg/cm² |
ASTM D-1002 |
| Compression strength |
700 kg/cm² |
ASTM D-695 |
| Electrical resistance |
30000 MEGOHMS |
ASTM D-257 |
| Shrinkage |
< 1% |
ASTM D-2566 |
| Non volatile content |
100% |
120 C for 1 hour |
| Chemical resistance |
resistant to hydrocarbons, Ketons, alcohols, esters, Halocarbons,
aqueos salt solutions, and dilute acids and bases. |
Visual inspection 7 days immersion |
| Temp. resistance |
150 ºC for up to 1 hour, 120 ºC constant |
|
10. Stability and reactivity
| Conditions to avoid: |
This product is stable. |
| Materials to avoid: |
None |
| Dangerous by products |
When incinerated carbon monoxide, aldehydes, acids and oxides of
sulphur and nitrogen can be released. |
11. Toxicological information
| General |
|
| Inhalation: |
None, dust caused by sandpapering the hardened product can cause lung
damage |
| Skin contact: |
Possible irritant and sensitizer |
| Eye contact: |
Possible irritant and sensitizer |
| Ingestion: |
Irritation of the intestinal tract |
12. Ecological information
| General: |
Prevent discharging into environment. |
| Ecotoxicity: |
Not established |
| Mobility: |
— |
| Persitance and decomposition: |
— |
13. Disposal considerations
Removal in accordance to applicable regulation.
14. Transport information
Transportation labelling not required.
15. Regulatory information
| Labelling: |
Irritant |
| Symbol: |
Xi |
| Warning phrases: |
Contains epoxy compounds. See indications of the producer. Can cause over-sensitization with contact to skin, irritating to eyes and skin. Poisonous to aquatic organisms. Can cause in the long term a dangerous effect in the aquatic environment. |
| Safety precautions: |
Keep out of reach of children. Avoid contact with eyes and skin. When in contact with eyes flush with plenty of water and consult a physician. After contact with the skin flush immediately with plenty of water. In case of ingestion immediately consult a physician and show packaging. Avoid discarding into nature. Ask for special instructions / safety card. |
16. Other information
List of in point 2 named R-phrases
| R43 |
Can cause sensitization by skin contact |
| R36/38 |
Irritating to eyes and skin |
| R51/53 |
Poisonous to aquatic organisms. Can cause in the long term a dangerous effect in the aquatic environment |
| R22 |
Dangerous by ingestion |
D5 Creation